ME · Manufacturing · NCCI state

Manufacturing workers compensation in Maine

Maine is an NCCI loss-cost state, so class-by-class Manufacturing rates are available only via NCCI subscription, not in public filings. As a national reference, Manufacturing workers comp runs a median of $1.46 per $100 of payroll, with a range of $0.056 to $34.79 across reporting states. Maine caps weekly benefits at $1,499 with a 2-year statute of limitations. Verified 2026-05-09.

National median $1.46
Rate authority NCCI
Max weekly benefit $1,499

Manufacturing rate context for Maine

Maine does not publish class-by-class loss costs publicly, but Manufacturing rates from comparable reporting states give you a useful planning range. Use the national rate range below as a baseline; your actual quote depends on payroll size, loss history, and your specific NCCI class code.

Manufacturing class code Typical occupation National median National range
6872 Ship Building $1.46 $0.056 - $34.79
3081 Automobile Mfg. $1.46 $0.056 - $34.79
3085 Aircraft Mfg. $1.46 $0.056 - $34.79
1710 Stone Cutting or Polishing $1.46 $0.056 - $34.79
3082 Truck, Trailer or Bus Mfg. $1.46 $0.056 - $34.79
1803 Plaster/Plaster Board Mfg. $1.46 $0.056 - $34.79
6801 Boat Building - wood $1.46 $0.056 - $34.79
6845 Boat Building $1.46 $0.056 - $34.79
1701 Cement Manufacturing $1.46 $0.056 - $34.79
2111 Malt House Operation $1.46 $0.056 - $34.79
Why no per-state rates here? Maine is an NCCI state where loss-cost data is published only to NCCI subscribers, not in public state insurance department filings. The class codes above use the same NCCI nomenclature, but your binding rate comes from your carrier's filed loss cost multiplier (LCM) applied to those base loss costs.

Maine compliance for Manufacturing employers

Coverage threshold

Employers with one or more employees are required to carry workers' compensation insurance.

1099 vs W-2 in Manufacturing

As of October 25, 2023, an individual who wants to create a rebuttable presumption of independent contractor status may file a statement - Independent Contractor Statement (Form WCB-267), with the Board. The Board will no longer review or approve Predetermination Applications (WCB-266).

Owner exclusion

Allowed in Maine. Sole proprietor self-coverage optional; LLC member self-coverage optional.

Max weekly benefit

$1,499 at 66.67% of average weekly wage, effective 2025-07-01.

Statute of limitations

2 years from injury date in Maine.

Audit window

Maine carriers audit payroll Typically within 90-120 days of policy expiration.. Keep Manufacturing payroll segregated by class code and have job-duty documentation ready.

Cross-cite: full Maine workers comp overview · Manufacturing cross-state rate comparison · Maine workers comp lawyer guide · Maine settlement chart

Estimate your Manufacturing premium in Maine

Pre-filled to Manufacturing and Maine. Adjust payroll to see a real premium range from filed rates.

Estimate your workers comp premium

Pick your industry, state, and annual payroll. Range comes from real rate filings.

Filing checklist for Manufacturing businesses in Maine

  1. Step 1, Confirm coverage threshold

    Employers with one or more employees are required to carry workers' compensation insurance. For Manufacturing operations, this typically applies once you make a first W-2 hire, even part-time.

  2. Step 2, Pick the right class code

    Manufacturing businesses typically use codes like 6872, 3081, 3085. The wrong code can cost 4 to 10x more or get reclassified at audit. Across reporting states, Manufacturing median rates run $1.46 per $100 with a range of $0.056 to $34.79.

  3. Step 3, Get a quote

    Maine Employers Mutual Insurance Company (MEMIC) is one option in Maine; private carriers (Travelers, Hartford, Liberty Mutual, AmTrust) also write coverage. Schedule credits up to 25% are typical for low-loss accounts.

  4. Step 4, Document subcontractors

    A principal contractor is liable for injuries to employees of an uninsured subcontractor. Manufacturing operators with crews of 1099s should keep certificates of insurance for every sub, otherwise the GC absorbs the sub liability at audit.

  5. Step 5, Annual audit

    Carriers audit payroll Typically within 90-120 days of policy expiration.. Have payroll segregated by class code, job descriptions on file, and overtime properly excluded from rated payroll. Manufacturing class allocation can shift if any worker spends more than 50% of time on a different code.

Penalty for non-coverage in Maine: Penalties include fines, stop-work orders, and the employer is directly liable for all benefits.

Manufacturing workers comp FAQs in Maine

Why aren't Manufacturing workers comp rates published for Maine?

Maine uses NCCI for workers comp ratemaking. NCCI loss-cost data for this state is published only to NCCI subscribers, not in public state insurance department filings. For a national reference, Manufacturing median rates run $1.46 per $100 of payroll across all reporting states, with a typical range of $0.056 to $34.79.

How can a Manufacturing business in Maine get a real quote?

Get a quote from any private carrier licensed in Maine or the state fund (Maine Employers Mutual Insurance Company (MEMIC)). Provide your annual payroll, ownership structure, and your current Manufacturing class code. Most carriers will return a binding quote within 24-48 hours. Schedule credits up to 25% are typical for low-loss accounts.

Are Manufacturing 1099 contractors covered by workers comp in Maine?

As of October 25, 2023, an individual who wants to create a rebuttable presumption of independent contractor status may file a statement - Independent Contractor Statement (Form WCB-267), with the Board. The Board will no longer review or approve Predetermination Applications (WCB-266).

What is the maximum weekly benefit for an injured Manufacturing worker in Maine?

Maine caps weekly workers comp benefits at $1,499 (effective 2025-07-01), calculated as 66.67% of the average weekly wage. Manufacturing workers are subject to the same statutory cap as workers in any other industry.

How long does a Manufacturing worker have to file a comp claim in Maine?

The statute of limitations in Maine is 2 years from the date of injury. Most claims also require notice to the employer within 30 days. Manufacturing workers should report any incident on the date it happens, even minor strains, because cumulative trauma claims can fail without contemporaneous documentation.

Can a Manufacturing business owner exclude themselves from comp coverage in Maine?

Yes, Maine allows business owners (sole proprietors, partners, LLC members, corporate officers) to file an exclusion election. Manufacturing owner-operators often elect out to keep premium below the minimum. Sole-proprietor self-coverage is not required, and LLC member self-coverage is not required.

Related